Home  ꄲ  Industrial series  ꄲ  S7010F-8P-I Industrial PoE switch
ꁆ ꁇ

S7010F-8P-I Industrial PoE switch

  •  

    9 Port 10/100/1000Mbps + 1 Gigabit SFP with 8 PoE Ethernet Switch
     
     
    The switch supports one-key function conversion, currently supports five modes, normal mode,
    VLAN mode, Extend mode
    Normal: Normal mode, no special function (Normal mode all switch down)
    VLAN : 1-8 port will not communicate with each other only communicate with uplink port.
    It will control the Net storm, protect the information security.
    Extension: the 1-8 ports communicate with each other and with the uplink ports; the 1-8 ports
    can transmit 250 m with Cat5e / 6 cable or better
    WATCHDOG:WATCHDOG The network port has a link but for 2-3 minutes with no data transmission,
    restart the POE port. Originally has already had LINK but disconnected for 2-3 minutes without link,
    restart the POE port
    QOS: QOS is the specified port with port data priority, priority is higher than other ports, other ports
    data priority is equal. For example, 8 ports and 1-2 ports specify the priority, then the data forwarding
    of these two ports has a higher priority than the other ports, so the data of these two ports are
    preferentially forwarded
     
    Conforms to IEEE802.3, IEEE 802.3u, IEEE 802.3z, IEEE802.3af, IEEE802.3at
    Provides 9 10/100/1000Base-T ports + 1 Gigabit SFP
    Provides 8 PoE injector and 130W power adapter
    High back-plane bandwidth 20 Gbps
    IEEE802.3x Flow control
    Surge protection for power port and data ports
     

    Specification

    item

    specification

     

    Port

    9 1000Mbps RJ-45，1 SFP port

    LED Lights

    PWR, PoE, Link/Act LED，PoE Power usage（Support power dynamic display）.

    Input

    48~57VDC (for PoE switch)

    PoE output power

    130W (130W for PoE)

    Operating temperature

    -40 ℃ ~ 70 ℃ (T models) / 0 ~ 50 ℃ (Normal model)

    storage temperature

    -40℃～75℃.

    Working humidity

    10%～90% (non-condensing).

    Cooling

    Metal cooling

    bandwidth

    20G.

    MAC address table

    4K.

    Flow Control

    IEEE 802.3x full-duplex flow control.

    PoE

    PoE port

    8 10/100/1000Base-TX ports.

    PoE standard

    IEE802.3af, IEEE802.3at, per port 30W(MAX)

    Total power 130W

    PoE power supply pin

    V+ (RJ45 Pin 1, 2), V- (RJ45 Pin 3, 6).

    Alarm

    Alarm Relay load capacity

    DC30V@2A AC125V@0.5A

     

Conforms to IEEE802.3, IEEE 802.3u, IEEE 802.3z, IEEE802.3af, IEEE802.3at
Provides 9 10/100/1000Base-T ports + 1 Gigabit SFP
Provides 8 PoE injector and 130W power adapter
High back-plane bandwidth 20 Gbps
IEEE802.3x Flow control
Surge protection for power port and data ports
Support VLAN /QOS/EXTEND/WATCHDOG