D5006-4PS-60 Unmanage fast-ethernet 6ports PoE switch

  •   Conforms to IEEE802.3, IEEE 802.3u, IEEE802.3af, IEEE802.3at
  •   Provides 6 10/100Base-TX ports
  •   Provides 4 PoE injector and 63W Built-in power supply
  •   High back-plane bandwidth 1.2Gbps
  •   IEEE802.3x Flow control
  •   Provide POEport priority
  •   provides the function of VLAN+ extension



The D5006-4PS-60, an unmanaged Fast-Ethernet switch, is designed for residential building in the corridor-level broadband switching equipment, for the edge of the access and LAN to provide high-quality network connections.

The D5006-4PS-60 provides 6 10/100Base-TX ports. It provides 4 PoE Injector.

The POE function has port priority by default, and the priority order is 1 to 4, which corresponds to the port number. And control the total output power of POE within 60W. That is, when the total output power of the POE exceeds 60W, the device will sequentially close the ports with lower priority. For example, when four ports of POE are powered at the same time, when the load of the terminal increases, causing the total power of POE to exceed 60W, the device will turn off the POE function of the fourth port, which can better protect the switch from overload work, and can Improve product stability.

The D5006-4PS-60 provides the function of VLAN+ extension, it can be switched by a button, When the button is moved to the ON position to enable the function and OFF position to close it. In the VLAN+ extension mode, the port (1~4 port) which port rate is forced to be 10M can only communicate with the Uplink port (5,6 port), but the port (1~4 port) cannot communicate with each other.


Item Description
Fixed port 6 10/100Base-TX ports.
LED Indicators PWR, Extension, PoE, Link/Act LED.
Input voltage 100V~240V AC,50/60Hz
Power consumption 63W (60W for PoE)
Operating temperature 0℃~40℃.
Storage temperature -10℃~70℃.
Relative humidity 20%~90% (non-condensing).
Thermal methods Fanless.
Switching capacity 1.2G.
MAC address table 1K.
Traffic control IEEE 802.3x full-duplex flow control.
Size 200*118*44mm
PoE port 4 10/100Base-TX ports.
PoE Standard IEE802.3af, IEEE802.3at, per port 30W(MAX)

Total 60W

Pin assignment V+ (RJ45 Pin 1, 2), V- (RJ45 Pin 3, 6).

Your Name

Your Email

Inquiry Product

Your Message